BRISK STEEL FOCUS ON PRODUCE AND SUPPLY HOLLOW SECTION AND STEEL PIPE

Home
About Us
Project
Products
Facility
BLOG
Contact Us

Custom

Add：Daqiuzhuang Industrial Area,Jinghai County,Tianjin,China

Tel：08618322290777

E-mail：sales@briskmetal.com

Quote Now

Solutions for Your Industry, Ready for Your Choice

Home page

RODUCTS

Brisk Steel Group

ASTM A572 GR.50 LSAW STEEL PIPE

Commodity name： ASTM A572 GR.50 LSAW STEEL PIPE

subcategory：

Tel：

E-mail：

1. Overview of Main steel grades and differences

Steel grade	Yield strength (ksi/MPa)	Tensile Strength (ksi/MPa)	Chemical Composition Characteristics	Typical Application scenarios
GR.42	42 (290)	60 (415)	Low manganese, no microalloying elements	Lightweight structure, common pressure-bearing pipeline
GR.50	50 (345)	65 (450)	Niobium/vanadium microalloy	High-pressure pipelines, Bridges, buildings
GR.60	60 (415)	75 (520)	High manganese + niobium/vanadium reinforcement	Heavy-duty structures, deep-sea pipelines
GR.65	65 (450)	80 (550)	High manganese + niobium/vanadium/titanium composite strengthening	Extreme high pressure and low temperature environment

2. Detailed difference analysis

(1) Chemical composition
• GR.42:

Carbon (C) : ≤0.26%, Manganese (Mn) : ≤1.35%

No microalloys are added, resulting in a lower cost but limited strength.

• GR.50:

Carbon (C) : ≤0.23%, Manganese (Mn) : ≤1.35%

• Add niobium (Nb) or vanadium (V) to enhance strength through grain refinement.

• GR.60/GR.65:

Carbon (C) : ≤0.23%, Manganese (Mn) : ≤1.65%

It features a higher manganese content and is compounded with niobium, vanadium and titanium (Ti) to achieve a balance between high strength and toughness.

(2) Mechanical properties
• Strength enhancement:

The yield strength of GR.50 is approximately 19% higher than that of GR.42 (290→345 MPa), while that of GR.65 is another 30% higher than that of GR.50 (345→450 MPa).

• Elongation rate:

The elongation of high-strength steel grades (such as GR.60/65) is slightly lower (≥16%), but still meets the structural plasticity requirements.

• Low-temperature toughness:

Steel grades GR.50 and higher need to meet the impact test at -40℃, and GR.65 may have stricter requirements (such as -60℃).

(3) Processing and welding
• GR.42:

It has excellent welding performance and does not require complex preheating processes.

• GR.50-GR.65:

The welding heat input needs to be controlled, and the preheating temperature should be increased (for example, GR.65 requires preheating at 150-200℃) to prevent cold cracking.

The welding materials need to match the strength (such as AWS E10018-G electrodes).

(4) Cost and Economy
• Material cost: GR.65 > GR.60 > GR.50 > GR.42 (due to the increase in alloy content).

• Comprehensive cost: High-strength steel grade can reduce material usage (such as thinning the wall thickness), making it suitable for large-span or high-load scenarios.

3. Application scenario comparison

• GR.42:

Low-stress structures (warehouse supports, fences), low-pressure water pipes/air pipes.

• GR.50:

• Main oil and gas transportation lines, bridge supports, and high-rise building frames.

• GR.60:

Deep-sea oil and gas pipelines, heavy robotic arm structures, and buildings in earthquake-prone areas.

• GR.65:

Polar low-temperature pipelines, ultra-high pressure gas storage tanks, and pressure-resistant components for nuclear power plants.

4. Selection suggestions

• Priority GR.50: High cost performance, covering most engineering requirements.

• Conditions for choosing GR.60/65:

• The design load is extremely high or requires significant weight reduction (such as on offshore platforms).

• Low-temperature environments (such as Arctic pipelines) or strict fatigue resistance requirements.

• Use GR.42 with caution: Only for non-critical and low-stress scenarios.

5. Testing and Standards

• High-strength steel grade (GR.60/65) requires additional testing:

• Charpy V-notch impact test (low-temperature toughness).

Hardness test (to prevent weld embrittlement).

• Strict non-destructive testing (UT/RT) ratio (such as API 5L PSL2 requiring 100% testing).

Summary

ASTM A572 LSAW steel pipes achieve strength classification by adjusting the alloy composition. GR.50 is a universal high-strength choice, while GR.60/65 is targeted at extreme working conditions. The selection should balance the strength requirements, processing difficulty and cost, and strictly follow the welding and inspection specifications.

Core Advantage

Brisk Steel Group is rooted in a culture of "technology as the backbone, quality as the soul, and customers as the heart." Through relentless innovation, global expansion, and a commitment to responsibility, we strive to become a trusted global partner and a technological benchmark in the steel manufacturing industry.

Craftsmanship with Precision

We adhere to a rigorous quality control system that spans the entire production process—from raw material procurement and manufacturing to product delivery—ensuring the highest standards of excellence.

Innovation-Driven Technological Leadership

We prioritize R&D and technological advancement, integrating cutting-edge production lines (e.g., JCOE large-diameter LSAW pipe production) and expert teams from countries like Germany and the Netherlands to maintain our position at the forefront of the industry.

Globalization and Open Collaboration

Actively engaging in the global supply chain, we have obtained international certifications such as CE marking, enabling our products and services to reach worldwide markets.

Professional Team and Talent Empowerment

We value the recruitment and development of technical talent, building an international and professional team that drives continuous growth.

ASTM A252 PILING PIPE

Lsaw Pipe